三角形接法与星形（Delta connection and star）.docVIP

三角形接法与星形（Delta connection and star） Three - phase motor, star and triangle two kinds of connection method, is the design of fixed connection method, can not be changed. For example, the three-phase 380V star connection method is changed into triangle connection, and the adaptive voltage is three-phase 220V. The triangle connection is changed into star connection, and the voltage is 660V. Motor is high power, in order to avoid the starting current is too large to impact on the line, the general approach is to change the triangular connection to star start, starting after conversion back to the triangle operation. Y series motors 3KW below are star connected, 4KW above are triangular connection. Three-phase star connection motor each phase winding can withstand voltage of 220V. They pick star for 380V. Then the motor three-phase voltage angle of each phase winding can withstand voltage of 380V, they pick star for 660V. The general voltage can not change the connection way of the motor. Only the motor winding angle of access power is larger (more than 14KW) when start with star connection. Reduce the starting current and wire section. Because of the small output power, the motor of the motor or the motor with larger power is used at the starting time, so that the loss of the machine is less, and after normal work, the connection of the triangle is replaced The three-phase motor below 3KW is star connected, and the three-phase motor is used Delta connection There are voltage differences: star connection and delta connection, the output phase voltage is 220V and 380V Three star winding connection, each end is connected with the three-phase voltage of a phase, the other end is connected together, and do not take any one phase, can not take the zero line voltage, so each winding is the phase voltage is the voltage of each relatively, which is usually 220V. Delta connection is end to end three windings are respectively connected with the three-phase voltage in the three con