公路大纲（Highway outline）.docVIP

公路大纲（Highway outline） The third chapter highway A test engineer exam outline A test purpose and requirement The two main examination content Standard for quality inspection and assessment of highway engineering. The methods of quality inspection and assessment of Highway Engineering Understand the concept and division method, unit division and engineering; key projects, regulations such as extreme concept. Familiar with: Inspection and evaluation procedures; engineering quality inspection; grading method of engineering quality; engineering quality rating. Master: evaluation standard highway engineering quality inspection of the purpose and scope of the provisions; sub project score. The roadbed earthwork project quality inspection Understand: Earthwork subgrade, rock embankment, soft soil foundation, geosynthetics layer basic requirements; appearance identification, Rock Subgrade Earthwork subgrade; experimental project soft foundation treatment, geosynthetics layer; pipe foundation and pipe prefabrication, pipeline installation, inspection section (Yu Shui) basic requirements wellmasonry gully, masonry drains, blind ditch and appearance identification; retaining walls and masonry works the basic requirements and basic requirements of appearance identification; other sub project. Familiar with: general provisions; earthwork subgrade and roadbed project measured; measured key project of soft soil foundation treatment, geosynthetics layer; general drainage engineering; pipe prefabrication, pipe foundation and pipe installation and inspection (rain) project measured wellmasonry soil ditch, masonry drains, blind the basic requirements for wall ditch; backfill; retaining wall and masonry engineering measurement project; key project measured other projects. Master: Earthwork subgrade, roadbed measured key project; pipe prefabrication, pipe foundation and pipe installation, check (rain) measured key project wellmasonry soil ditch, masonry drains, blind ditch; retaining wal