取代液压和机械控制 全球线控技术盘点（Replacing hydraulic and mechanical controls worldwide by wire technology inventory）.docVIP

取代液压和机械控制 全球线控技术盘点（Replacing hydraulic and mechanical controls worldwide by wire technology inventory） Replace the hydraulic and mechanical control of the global inventory by wire technology Automotive electronics, automation control system is the direction of development, in the next ten years, the car will become a traditional mechanical control system through the electrical system is connected with the high performance of CPU high speed bus fault tolerant communication. If the car will use the electric motor and the control signal to realize the drive by wire brake by wire (steerbywire), (brakebywire), by wire throttle (drivebywire or throttlebywire) and wire suspension (suspensionbywire), the control system will completely replace the hydraulic and mechanical control of the existing systems. A steering system, SBW control The name is SteeringByWire SBW English. Chinese means steering by wire system. The system to remove the steering wheel and steering wheel mechanical connections between reduced about 5kg weight, eliminates the impact of pavement, has the advantages of reducing noise and vibration etc.. The famous foreign car companies and auto parts manufacturers to research a new generation of steering system with intelligence, such as the United States Delphi company, TRW company, Mitsubishi Co, Japan Koyo company, Germany Bosch company, ZF company, BMW company has been in the development of SBW system of the country also began to get involved in this research field. The SBW system consists of steering wheel steering module and ECU3 module, main parts and automatic anti fault system, power supply and other auxiliary modules. The steering wheel module comprises a steering wheel, steering wheel angle, torque sensor, steering wheel aligning torque motor. The main function of the steering wheel module is turned to the drivers intention (as measured by the steering wheel angle) is converted into digital signal and transmitted to the main controller; at the same ti