基本橡胶应用（Basic rubber applications）.docVIP

基本橡胶应用（Basic rubber applications） Basic characteristics and application range of various rubbers 1 acrylonitrile butadiene rubber (NBR) 1.1, acrylonitrile butadiene rubber content in the range of 15%-50%, generally more in the polymer combined with acrylonitrile quantity to classify, can be divided into five series, namely: Very high acrylonitrile rubber, acrylonitrile content above 43%: Acrylonitrile high acrylonitrile butadiene rubber, acrylonitrile content 36-42%: Medium and high acrylonitrile butadiene acrylonitrile rubber, acrylonitrile content 31-35%: Acrylonitrile butadiene acrylonitrile rubber, acrylonitrile content 25-30%: Low acrylonitrile butadiene acrylonitrile rubber with acrylonitrile content below 24%: 1.2, basic characteristics: 1.2.1 has high stability for non-polar or weakly polar mineral oil, animal and vegetable oil, liquid fuel and solvent because of its polar nitrile group. Oil resistance is its biggest specialty, the higher the propylene content, the better the oil resistance. 1.2.2, heat resistance is better than natural rubber, styrene butadiene rubber, chloroprene rubber, can be used for 120 years in the air for a long time. 1.2.3, good air tightness, second only to butyl rubber. 1.2.4, cold resistance, low temperature resistance, the higher the content of acrylonitrile, the worse the cold resistance. 1.2.5, because it is a non crystalline rubber, rubber strength is low, should be mixed with reinforcing agent, improve the bound acrylonitrile content helps to increase the strength and wear resistance, but decreased elasticity. 1.2.6 and NBR have poor dielectric properties, which belong to the semiconductor rubber. The balance between oil resistance and permanent deformation of 1.2.7 and rubber compound, and the balance between oil resistance and electrical property is important. 1.3, the scope of application: mainly used for producing oil resistant rubber products, widely used in the manufacture of seals, gaskets, washers and other molded ar