基础部分(笔试)第二部分 选择题(含113题)(重点)（The basic part (written examination), the second part of the multiple-choice questions (including 113 questions) (focus)）.docVIP

基础部分(笔试)第二部分 选择题(含113题)(重点)（The basic part (written examination), the second part of the multiple-choice questions (including 113 questions) (focus)） The basic part (written) second part (including 113 multiple-choice questions) 1.A 2.C 3.A 4.A 5.B 6.A 7.D 8.B 9.D 10.B 11.A 12.A 13.D 14.B 15.B 16.A 17.B 18.B 19.D 20.D 21.B 22.B 23.D 24.B 25.A 26.D 27.B 28.B 29.D 30.C 31.D 32.C 33.B 34.A 35.A 36.B 37.D 38.B 39.C 40.D 41.A 42.C 43.D 44.B 45.B 46.D 47.B 48.A 49.D 50.D 51.C 52.B 53.A 54.B 55.D 56.A 57.C 58.D 59.D 60.A 61.C 62.C 63.D 64.D 65.B 66.D 67.B 68.A 69.D 70.A 71.B 72.C 73.D 74.C 75.A 76.D 77.A 78.D 79.C 80.C 81.A 82.B 83.B 84.B 85.B 86.D 87.C 88.A 89.A 90.B 91.C 92.D 93.D 94.C 95.B 96.B 97.D 98.C 99.A 100.C 101.C 102.D 103.A 104.C 105.B 106.C 107.C 108.B 109.D 110.B 111.A 112.B 113.C 1. under normal temperature, what factors determine the hardness of steel? The content of A and carbon in steel. B, the steel austenite grain size. The distribution of iron particles and C matrix in steel. Particle into the austenite in the steel and D. 2.2024 Aluminum Alloy from heat treatment medium placed in a quenching tank must be quickly, Among the general delay time of less than 10 seconds, so you can A, prevent stress concentration. B, delay the aging hardening process. C, get good corrosion resistance. D, ensure that the aluminum core and the cladding layer is well bonded. 3.SAE2330 said A, the carbon content of 0.3%, containing 3.5% nickel alloy steel. B, the carbon content of 0.3%, 2.5% chromium alloy steel. C, the carbon content of 0.3%, with 2.3% Mn alloy steel. D, the carbon content of 0.23%, containing 3% nickel alloy steel. 4.7075-T6 is Aluminum Alloy A, after the aluminum zinc alloy solution heat treatment and artificial aging. B, after the Al Cu alloy solid solution heat treatment and artificial aging. C, only aluminum zinc alloy artificial aging. D, only for artificial aging of Al Cu alloy. 5. which of the following is a Aluminum Alloy grades show that the metal i