夹丝玻璃jc 433-91（Wired glass JC 433-91）.docVIP

夹丝玻璃jc 433-91（Wired glass JC 433-91） Standard text 1 subject matter and scope this standard specifies the wired glass product classification, technical requirements and test methods, inspection rules, packaging, transportation and storage requirements. This standard is applicable to embedded in the building door and window, partition and fire, earthquake and other uses of wired glass. 2 reference standard GB 45 high-rise civil building fire protection design code test method 12513 glass fire-resistant GBJ 5 term 5.1 wired patterned glass: with wire or metal net in the rolling process, the plate glass side pressure pattern. 5.2 wire polished glass: polished wire glass surface. 4 product categories 4.1 products are divided into wired and wired patterned glass polished glass two. 4.2 according to the thickness of product is divided into: 6, 7, 10mm. 4.3 products are divided into 4 grades: excellent products, first-class products and qualified. 4.4 the product size is generally not less than 600mmX400mm, not more than 2000mmX1200mm. 5 technical requirements 5.1 mesh with wire glass requirements of metal wire mesh and metal wire is divided into two kinds of ordinary steel and special steel wire, ordinary steel wire diameter is more than 0.4mm, or special wire diameter is more than 0.3mm. Wire net glass should be used after welding wire mesh processing. 5.2 dimensional deviation of length and width of allowable deviation of 4.0mm. 5.5 the thickness deviation of the thickness deviation should be allowed to meet the provisions of table 1. Table 1mm thickness allowable deviation range of first quality, qualified 6 + 0.5 + 0.67 + 0.6 + 0.710 + 0.9 + 1 5.4 5.4.1 bending wire embossed glass shall be within 1%. 5.4.2 of the polished glass shall be within 0.5%. 5.5 glass edge, protruding gap, lack of angle and deflection of the glass size edge protrudes, the gap should not exceed 6mm, the size deviation shall not exceed 4mm. A piece of glass is allowed to have only one missing an