如何挑瓷砖（How to pick tiles）.docVIP

如何挑瓷砖（How to pick tiles） A, wear resistance, a knife or a key on the floor surface of the brick hard row, if there is no trace, that is wear; Two, water absorption, water on the back of the floor tiles, the less water, the better the quality; Three, pollution resistance, with a pen, a drop of ink on the surface of the floor (if it is polished to put the surface wax first with steel ball rub), 10 minutes after the clean, if can completely clean the dirt proof ability is good; Four, flatness, put a piece of tile face upward on the flat ground, put another piece of tile face down in front of the block on the floor, then use the palm of your hand push the floor above, especially if the floor is easy to slide, warping, smooth the degree is not high, the quality is not good. In addition, there are floor tiles can not be chromatic aberration, buy when you want to say clearly with the business, and can not be radioactive. Identification method of above, you have to agree with you to the seller, or you may be lost again. The decoration of a house is not really easy, so be careful in the selection of ceramic tile, if not antifouling tiles, with a long face acne, let people worry about (or non slip tiles, with children and the elderly families, it is a tragedy, but also has good smoothness not only the living room tiles broken, if accidentally tripped and fell, my days) here to introduce a simple and effective selection techniques for your reference: The first step: from the box to remove any one, to see if the surface is smooth and intact, glazed should be uniform, bright, no spots, missing glaze, bump phenomenon, around the edges neat. Glazed surface is not bright, hair acerbity, or have bubble, all belong to quality problem The second step: take a piece of brick, two pieces of alignment, the smaller the gap between the better. If the design brick must use four pieces to piece together a complete pattern, should also be good at whether the brick pattern is connected, clear.