osb板讲解（osb板讲解）.docVIP

osb板讲解（osb板讲解） 1, OSB board enough environmental protection The glue used for OSB boards is resin glue. The pine tree itself contains resin gum (which contains the largest amount of pine gum in all wood) and the same viscosity as after shaving. Then, from the pine tree extract of resin glue, through the sizing machine after storage and pavement, and after 200 degrees high temperature hot pressing, forming now you see OSB board. Chinas current three plywood, multi-storey panels, MDF and so far can not meet the basic requirements of todays home improvement environmental protection. The product has been in Germany, the United States, Canada, Japan, South Korea, Holland, Britain and other statutory certification HBF certification, full compliance with European E1 standards, and by the world recognized certification authority. 2, OSB board environmental protection plate expansion coefficient is small, water content is 9, 4% Destructive experiments have been done on the expansion coefficient of the OSB plate. The experimental results are as follows: The original OSB thickness of 18mm, 18mm plate soaked in water for 3 months (90 days later), for the 21mm, only increased by 3mm. The structure of the plate is still intact. It has a moisture content of 12%. The blockboard completely inflated in 4 hours and completely destroyed the structure. OSB plates are placed in boiling water above 100 degrees Celsius, and the refrigerator is not deformed at minus 20 DEG C. 3, OSB board is not deformed, has a very good stability, and its ability to hold nails Because the OSB board is made of pine wood, from multilayer laminated, the force is even, the strength is good. The other is the whole plate stress, resulting in wood out of shape. And the OSB board wont even if a small piece moves, Will not be affected by other small pieces. The OSB board has excellent stability. This is impossible to do with any plate. Whatever the screws are, they are solid at any point. The OSB board wont curl up