rfid（RFID）.doc

rfid（RFID） The supply of electromagnetic wave absorbing materials, electronic wave absorbing materials, RFID tags, wave absorbing materials, conductive materials, networking Absorbing material is a kind of electromagnetic wave absorption composite material, eliminate back and forth the reflection of the electromagnetic wave shielding cavity, reducing clutter on the device itself, but also effectively prevent electromagnetic radiation on the harassment and damage the surrounding equipment and personnel, is a means of eliminating advanced electromagnetic wave pollution. Commonly used thicknesses include: 0.05mm, 0.1mm, 0.2mm, 0.25mm, 0.3mm, 0.5mm The NFC paid mobile phone and other handheld devices, electronic tags to be integrated or fit to electronic devices, as a function of parts of equipment, often due to limited space, inevitably will RFID tag (usually passive) attached to the metal surfaces or posted on conductive metal components of the position near the place. As a result, the tag induces an induced alternating electromagnetic field under the action of a signal issued by the reader, which is susceptible to the eddy current attenuation of the metal and greatly weakens the signal intensity, resulting in failure of the reading process. Therefore, in order to better apply the card reader, it is necessary to add absorbing materials in the product. Wireless charger 220V power becomes a sympathetic electromagnetic field, electromagnetic field and sympathetic to produce a sympathetic electromagnetic field, current charging into the sympathetic sympathetic electromagnetic field; electromagnetic fields encountered metal products are electronic eddy current, electronic eddy current will produce skin effect on metal, heat generated in the metal, reduces the charging efficiency, waste of energy. And interfere with the main board of the circuit, affecting the normal work of the charger. By using wave absorbing material, through high flux, Providing a loop for the sympathet