source insight设置（Source Insight设置）.docVIP

source insight设置（Source Insight设置） 1, background color selection To change the background color, Options-preference-windows background-color sets the background color 2, to solve the alignment problem character width. The default font for SIS is VERDANA. Its beautiful. This page should also use the VERDANA font. But because of the appearance of reason, VERDANA is not the same font. For example, the following two lines Llllllllll MMMMMMMMMM The same 10 characters, the length is much worse. Using VERDANA to see the program, some should have been aligned on the wrong side. The method is to use the same font, but it sure is ugly. The recommended comparison is using Courier New. 3, solve the TAB key indentation problem In the Editing Options column in the lower right corner of Options- Document Options, tick Expand tabs and then make sure. OK, now the indentation of the TAB key and the indentation of the four spaces appear to align in the SIS 4, the automatic alignment settings in SI: In the C program, if you encounter a statement that has no semicolon at the end of the line, such as IF, WHILE, SWITCH, and so on, write to the end of the line and press enter, then the new line automatically indented the two column relative to the previous line. There are three types of Auto, Indient, Type in Auto option under Option-Document Indient, None, Simple, Smart. Personal recommendation uses Simple type. 5 when adding files to a project, only a specific type of file (file type filter) is added When editing assembly code, build PROJECT and ADD TREE in SIS, The default settings do not include all the assembly files inside the TREE Only added to the.Inc and.Asm suffixes, and the.S suffix is not. And using SIS to open.S files, a black and white, no color, feeling back to the DOS EDIT era The solution is inside the Options-Document Options, click the Document Type drop-down menu on the left, and select x86 Asm Source File, Then, in the File filter on the right, *.asm; *.inc; followed b