网站大量收购独家精品文档,联系QQ:2885784924

怎样使用水准仪进行水准测量.txt(How to use leveling instrument for leveling.Txt).doc

怎样使用水准仪进行水准测量.txt(How to use leveling instrument for leveling.Txt).doc

  1. 1、本文档共7页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
怎样使用水准仪进行水准测量.txt(How to use leveling instrument for leveling.Txt)

怎样使用水准仪进行水准测量.txt(How to use leveling instrument for leveling.Txt) How to use leveling instrument for leveling First, the use of level The use of level include: level setting, coarse flat, aiming, fine leveling, reading five steps. (I) rehousing; The installation is to place the instrument on a retractable three foot stand and between the two observation points. First, turn on the three leg and make it moderately high. Use the eye count to approximate the frame head and check the foot stand firmly, Then open the instrument box and connect the leveling instrument to the three stand with a connecting screw. (two) rough flat; The rough flat is to make the instruments line of sight coarse level, and use the foot spiral to set the garden level bubble to live in the garden index circle. The method is shown in Figure 9-10 (a), where the bubble is not located at a, and the authorities concerned are first struck by the arrow The direction to which the finger is directed is relative to the rotation of the screws 1 and 2, so that the bubbles move to the position of the B, as shown in Figure 9-10 (b), and then turn the foot helix 3 so that the bubbles are centered. In the whole process, the direction of the movement of the thumb and the bubble moving direction. (three) aim Aim is to aim at the target accurately with a telescope. The first is to focus the telescope against the distant bright background, rotating the eyepiece and focusing the spiral, so that the cross is the clearest. Then loosen the fixing screw, rotating the telescope, so according to connection alignment level ruler door and sight, tighten the fixing screw. Finally, the object is rotated to screw the light, so that the level gauge falls on the cross wire plane clearly, and then the micro motion screw is rotated so that the image of the leveling rod is leaned against one side of the cross vertical wire. (four) Jing Ping The level of the telescope is to make the sight of the telescope precise. Tilting level, in

您可能关注的文档

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档