硬盘修复真经（Hard disk repair configurations）.docVIP

硬盘修复真经（Hard disk repair configurations） [reprint] hard disk repair errors, defects, Canon - parameters and grid In 1995, I happened to see an unfamiliar object with my colleague. I asked him curiously what it was. My friend replied, this is a computer hard drive.! This is the first time the hard disk after understanding friends. A few years down the computer more and more units of the computer, also more and more, the maintenance will have a chance to study PC friends. In the maintenance process, because the hard disk problem is more, especially the bad sectors the situation is even more. So, the computer books to check the library, Gaopeng Xinhua Bookstore, the method of repairing bad sectors. It is disappointing that the same way all kinds of books on the (suspected other suspected), not only useless, but also seriously mislead the reader. Over the years has been misled with several common problems is high: 1. hard disk logical defects can be repaired, and physical bad sectors can not be repaired. The actual situation is not bad, divided into logical bad sectors and physical bad sectors, do not know who invented the two concepts, but technical information provided by the manufacturer are not such a concept, it is divided according to the logical address record of bad sectors and record according to the physical address of the bad sectors. 2. hard disk factory users found no bad sectors, bad sectors means hard into the dangerous state. The reality is that each disk factory have recorded a number of bad sectors, some even reached a number of tens of thousands of bad sectors, by contrast, users found one or two bad sectors too much risk? 3. hard disk does not recognize the disk is not saved, 0 tracks broken, you can use partition method to solve. As a matter of fact, some of the hard disks that are not recognized can be repaired, and the 0 tracks are difficult to partition when they are broken. It is misleading to say that if you do not collect and study foreign lang