运值处岗位培训（Transportation Office Training）.docVIP

运值处岗位培训（Transportation Office Training） In 2010, the Department of transportation value, post training, year-end examinations (mechanical aspects) Unit: ______________ Name: ______________ fraction: ________ I. judgment questions (30 points) 1. bar Jiangkou generator rated voltage is 10500V, rated power 30000KW. (V) 2. Bajiangkou station thrust bearing material is elastic metal plastic tile (V) The upper, lower and water guiding grooves of the 3. Jiangkou power station are called at 65 degrees centigrade, and tripped at 70 DEG C (X) 4., rain weather should pay close attention to the operation of the water pump in the water collection well and the drainage of the tunnel entrance. (V) 5. main shaft seal water requirements for clean water, to ensure the sealing water smooth, turbine operation for 0.20.5Mpa. seal water pressure (X) 6. Bajiangkou generators at maximum runaway speed, running 30min, will happen harmful deformation. (X) The 7. generator is a vertical shaft suspension structure with upper and lower guide bearings. The thrust bearing is located on the upper part of the upper frame, separated from the upper guide bearing, and uses an oil tank separately. (V) The 8. guide vane back loading according to the label sequence of guide vanes are lifted into the pit when lifting the machine, should pay attention to the protection of the rubber sealing ring; the guide vane hanging into the pit, should be the basic guarantee of guide vanes in a fully closed state, while ensuring that the guide vane is now the gap between state and the bottom ring is 0. (V) 9. Bajiangkou stator stator frame and stator core, stator winding, end ring, temperature measuring device and insulation components, the stator assembly total weight of about 84.2t. (V) 10. the generator adopts closed self circulating water cooling, and the inlet temperature of cooling water is not higher than 250C. (X) Two. Individual choice questions (30 points) 1. hydraulic turbine regulation task is accomplished b