a review of virtual sensing algorithms for active noise control回顾虚拟传感为有源噪声控制算法.pdfVIP

Algorithms 2008, 1, 69-99; DOI: 10.3390/a1020069 OPEN ACCESS algorithms ISSN 1999-4893 /journal/algorithms Review A Review of Virtual Sensing Algorithms for Active Noise Control Danielle Moreau , Ben Cazzolato , Anthony Zander and Cornelis Petersen School of Mechanical Engineering, The University of Adelaide, North Terrace, SA, 5005, Australia Bassett, 100 Pirie Street, SA, 5000, Australia E-mails: danielle.moreau@.au; benjamin.cazzolato@.au; anthony.zander@.au; d.petersen@.au Author to whom correspondence should be addressed. Received: 29 September 2008 / Accepted: 29 October 2008 / Published: 3 November 2008 Abstract: Traditional local active noise control systems minimise the measured acoustic pres- sure to generate a zone of quiet at the physical error sensor location. The resulting zone of quiet is generally limited in size and this requires the physical error sensor be placed at the desired location of attenuation, which is often inconvenient. To overcome this, a number of virtual sensing algorithms have been developed for active noise control. Using the physical error signal, the control signal and knowledge of the system, these virtual sensing algorithms estimate the error signal at a location that is remote from the physical error sensor, referred to as the virtual location. Instead of minimising the physical error signal, the estimated error sig- nal is minimised with the active noise control system to generate a zone of quiet at the virtual location. This paper will review a number of virtual sensing algorithms developed for acti