为状态栏添加显示辅助信息功能.docxVIP

为状态栏添加像素位置，度量单位，图像大小以及图像位数四个信息一、在主框架中定义状态栏各个分栏位置。1、在CMainFrame.h中，添加：#define PANE_CURSOR_POSITION1#define PANE_LENGTH_UNIT2#define PANE_IMAGE_SIZE3#define PANE_BIT_COUNT42、在CMainFrame.cpp中，indicators数组处改为：static UINT indicators[] ={ID_SEPARATOR, // status line indicator// cursor position ID_SEPARATOR,// length unitID_SEPARATOR,// image sizeID_SEPARATOR,// bit countID_SEPARATOR,ID_INDICATOR_CAPS,ID_INDICATOR_NUM,ID_INDICATOR_SCRL,};3、在OnCreate函数中，添加如下代码：intCMainFrame::OnCreate(LPCREATESTRUCT lpCreateStruct){…if (!m_wndStatusBar.Create(this) ||!m_wndStatusBar.SetIndicators(indicators,sizeof(indicators)/sizeof(UINT))){TRACE0(Failed to create status bar\n);return -1; // fail to create}// add panesm_wndStatusBar.SetPaneInfo( PANE_CURSOR_POSITION, ID_SEPARATOR, SBPS_NORMAL, 72);m_wndStatusBar.SetPaneInfo( PANE_LENGTH_UNIT, ID_SEPARATOR, SBPS_NORMAL, 25);m_wndStatusBar.SetPaneInfo( PANE_IMAGE_SIZE, ID_SEPARATOR, SBPS_NORMAL, 72);m_wndStatusBar.SetPaneInfo( PANE_BIT_COUNT, ID_SEPARATOR, SBPS_NORMAL, 28);}二、添加各状态栏分栏的控制函数1、在String Table中，添加以下几个字串：2、在View类中，添加成员变量：intm_nLengthUnit，并在View类的构造函数中，添加初始化代码：m_nLengthUnit = MM_TEXT;3、在View类中，添加以下几个成员函数：voidSetStatusBarLengthUnit(intnUnit);voidSetStatusBarCursorPosition(CPoint point);voidSetStatusBarImageSize(CSize size);voidSetLengthUnit(intnUnit);voidSetStatusBarBitCount(WORD wBitcount);4、分别为它们添加函数代码：voidCImageBoardView::SetStatusBarBitCount(WORD wBitcount){CStringstr;switch (wBitcount){case 1:str.LoadString(IDS_BITCOUNT_1);break;case 4:str.LoadString(IDS_BITCOUNT_4);break;case 8:str.LoadString(IDS_BITCOUNT_8);break;case 24:default:str.LoadString(IDS_BITCOUNT_24);break;}CMainFrame* pMainFrame= (CMainFrame*)(AfxGetApp()-m_pMainWnd);ASSERT_KINDOF(CMainFrame, pMainFrame);pMainFrame-m_wndStatusBar.SetPaneText(PANE_BIT_COUNT, str);}voidCImageBoardView::SetStatusBarLengthUnit(intnUnit){CStringstr;switch (m_nLengthUnit){case MM_HIENGLISH:str.LoadString(IDS_LENGTH_UNIT_INCH);break;case MM_HIMETRIC:str.LoadString(IDS_LENGTH_U