皮带轮模具设计说明书.docVIP

带轮塑料模具设计及工艺设计 摘 要：塑料工业是一门新兴产业，自塑料问世后几十年，塑料来源丰富，制作方便及成本低廉、金属零件塑料化的发展很快，在机械电子、国防、交通、通讯、建筑、农业、轻工业和日常生活用品等行业中都得到了广泛的应用，对塑料模具要求量增加。因此，研究注塑模具对了解塑料产品的生产过程和提高产品质量有很大意义。 本设计介绍了与制造方法。该注射模采用了结构其中的设计内容有塑件的工艺性分析、塑件的体积和质量计算及注射机参数的确定；结构设计：分型面选择、型腔数确定、型腔的排列方式、浇口设计、侧向分型抽芯机构设计、推出及复位机构方式确定；型芯、型腔尺寸计算；模具加热和冷却系统计算；模具闭合高度确定；注射机有关参数的校核；如此设计出的结构可确保模具工作运用可靠。最后对模具结构与注射机的匹配进行了校核。并用utoCAD绘制了一套模具装配图和零件图。关键词： Pulley injection mold design and process design Abstract：Plastics industry is an emerging industry, since several decades after the advent of plastic, plastic source of rich, convenient and low-cost production, plastic and metal parts of the developed rapidly, in machinery and electronics, defense, transportation, communication, construction, agriculture, light industry and daily necessities, such as industry, have been widely used on the plastic mold requested increase. Therefore, the research casts the mold to understand the plastic product the production process and improves the product quality to have the very big significance. This design introduced the injected molds design and the manufacture method. This injection mold has used 1 mold 1 cavity structures. which is designed as part of the craft-oriented establishment : Plastic Parts of the Process Analysis, Plastic Parts of the size and quality of calculation and the injection parameters set; Structural design : Surface choice cavity determination, Cavity the arrangement, gate design, lateral type pulling mechanism design, launch and reattached body identified; Core, Cavity size calculation; Die heating and cooling system computation; Mold closing high set; Injection machine parameters in the verification; The design of such a structure can be used to ensure reliable die. Finally, the injection mold structure and the matching machine was calibrated. Using a set of auto mapping mold parts and assembly plans. Key word: Plastic ;injection mold； side core 前言 1 第一章 塑件成型工艺性分析 2 1.1 零件尺寸设计 2 1.