hah a（哈一）.docVIP

hah a（哈一） 录音制作方法 录音软件: cooledit for 1.2 效果器插件: bbe sonic maximizer, ultrafunk2, wave3.0 声卡: 创新sb live! 麦克风很重要, 什么样的麦就有什么样的音质.可以把麦克风插在声卡的mic插孔里, 不过最好还是用一个话筒放大器, 比如家里的卡拉ok机什么的, 接入声卡的line in. 推荐使用创新sb live! 声卡.价格便宜, 效果好 (我也只会用这种声卡, 哈哈).设置声卡: 右击右下角黄色小喇叭, 点 选项, ――＞ 属性 ――＞ 录音, 如果你接的是mic接口, 就在 话筒 打勾; 如果接的是line in 就在 线性输入 打勾.打开声卡的 混音器 (如果你完整安装过声卡的驱动程序, 你一定能找到), 在顶端 音效环境 中选择 sing with kook karaoke 在预置中选择 karaoke. 打开cooledit for 1.2, 新建一个空白文档 (样本率44100, 立体声, 16位).用播放器放伴奏 (用耳机听), 对着麦克风唱歌 (这不用说吧), 点下面的红色键开始录音.这时录下的应该是没有伴奏也没有任何混响效果的人声 (如果不是, 请检查以上设置).建议录歌时分段录, 录一段存一段, 以便修改... 接下来进行编辑处理.点击cooledit左上角的波形, Multi rail mode. Right click in the first rail space insert the attached file into the hard disk. In the second rail blank right click in the first paragraph just recorded a cappella. Playing with the play button, right-click the file in order to align with the accompaniment of a drag. (in this way, align the second paragraph with the third paragraph). The first section of a cappella double-click file, enter track mode. Click on the conversion (I used the Chinese version, the number of the left side of the fourth) - DirectX BBE Sonic Maximizer, first use it as incentive. There are three knobs, basically the left control bass part, the middle control treble part, and the right side is the total output level. According to each microphone, voice and other appropriate adjustments, with Preview preview listening, until their satisfaction. Then, in the DirectX, choose Ultrafunk Reverb, plus reverb effect. This is rather complicated. Ill give you an address to see: Http:///man3han4quan2xi2/2000/ultrafunk/3reverb/1.htm;; Note the use of the scaling relationship between dry and reverb. Generally fast, rock songs or harmonic parts, reverb smaller, lyrical slow song, reverb larger. It is best to refer to the effect of the original singing. When the reverb is done, select Waves in DirectX C4, which is the pressure limit. People with research spirit can /man3han4quan2xi2/2000/c4.htm. Gen