protel 99常用封装名（protel 99常用封装名）.docVIP

protel 99常用封装名（protel 99常用封装名） Package for common components 1) resistance element The name AXIALxxx, XXX stands for 0.3-1.0. The larger the number, the greater the shape of the package. 2) capacitive element The name non-polar capacitor RADxxx, XXX means 0.1-0.4. Electrolytic capacitor RBxxx, XXX means 0.2/0.4-0.5/1.0. The greater the number, the greater the amount of capacitance. 3) triode element The name TO-xxx, XXX, represents the transistor type. In general, the NPN pin data 1,2,3 represent the B, C, and E poles respectively. 4) diode element Name DIODE0.4 or DIODE0.7. 5) fuse wire (fuse) Name FUSE 6) potentiometer (variable resistance) Name VR1-VR5 7) dual in-line components The name DIPxxx, XXX, indicates the number of element pins. Mostly integrated components 8) single row multi pin socket The name SIPxxx, XXX, indicates the number of element pins. Often used in circuit input and output interface and other occasions. 9) serial / parallel interface The name DBxxx, XXX, indicates the number of interfaces, pins, and interfaces. 10) quartz crystal oscillator (crystal oscillator) Name XTAL1 Protel package summary Part Encapsulation refers to the appearance and the position of the solder joint when the actual part is soldered to the circuit board. Is a purely spatial concept The different components can share the same part package, and the same component can also be packaged in different parts. Like resistors, there are traditional The needle type, the element size is large, the circuit board must be drilled to accommodate components, upon completion of the drilling, insert, and then Tin stove or spray tin (or hand welding), high cost, newer designs are used in surface mount small volume element (the SMD) this component does not have to drill holes. The semi molten solder paste is poured into the circuit board with a steel film, and the SMD element is placed on it to be welded Its on the circuit board. Resistance AXIAL Non-polar capacitor RAD Electrolytic capaci