siemens-hicom300e配置（Siemens-hicom300e configuration）.docVIP

siemens-hicom300e配置（Siemens-hicom300e configuration） 1, login: CTRL+T, LOGON=ROOT, PASSWORD=HICOM; 2, exit or interrupt: CTRL+X; 3, data save: EX--UPDAT:BP, ALL; 4, data backup: COPY--DDRSM:A1, 1, E, 6, E (E-J); 5, basic verbs: ADD (add), DEL (delete), CHA (change), REG (view), DIS (display), T (test), C (copy), ACT (open), DEA (off); 6, basic noun: SCSU (analog extension), PERSI (password), SA (line), ACSU (console), SBCSU (digital extension), COSSU (trunk), COP (signaling), TAPPO (keys), FEASU (management system). Siemens hicom300E configuration tool Comtes AMO instruction operation The basic maintenance of the switch is through the COMTES/ComWin maintenance software for its operation and maintenance management. In the maintenance of the terminal desktop. Click on the COMTES/ComWin icon, enter the interface; according to the CTRLT, type __user________, PASSW = type __hipath______, , you can use the AMO command to carry out its operation. Exit the COMTES operation Department: press CTRL + X, then the ESC key, and select Y, then you can go back to the maintenance terminal desktop. Exit the ConWin operation Department: press CTRL + X, then the Exit button, or directly close the operation window, then you can go back to the maintenance terminal desktop. If you dont have COMTES or COMWIN programming software, you can use the WINDOWS super terminal, but the carriage return must use CTRL+C instead. AMO instruction syntax structure: Verbs + instructions: arguments, arguments,...... Parameter; Common verb: ADD: new data: ADDSCSU CHA: modify the data: CHACOSSU DIS: to view the current data: DISACSU DEL: delete current data: DELWABE REG: the regeneration of the current data: REGACSU cases EXE: the execution of the process were: EXUPDAT STA: start processing cases: STAINFO DEA: closed cases: DEADSSU ACT: open example: ACT - DSSU Common instructions: ANSU exchange unit database number DIMSU open database space UCSU settings function unit BCSU setting circuit board WABE setting