NCP803 MAX803 三脚复位芯片.pdfVIP

MAX803 Series, NCP803 Series Very Low Supply Current 3-Pin Microprocessor Reset Monitor The MAX803/NCP803 is a cost−effective system supervisor circuit designed to monitor VCC in digital systems and provide a reset signal to MARKING the host processor when necessary. No external components are DIAGRAM required. The reset output is driven active within 10 sec of VCC falling 3 3 SOT−23 through the reset voltage threshold. Reset is maintained active for a (TO−236) xxx M timeout period which is trimmed by the factory after VCC rises above 1 CASE 318 the reset threshold. The MAX803/NCP803 has an open drain 2 1 2 active−low RESET output. Both devices are available in SOT−23 and SC−70 packages. SC−70 The MAX803/NCP803 is optimized to reject fast transient glitches xx M (SOT−323) on the VCC line. Low supply current of 0.5 A (VCC = 3.2 V) make CASE 419 these devices suitable for battery powered applications. 1 Features • Precision VCC Monitor for 1.5 V, 2.5 V, 3.0 V, 3.3 V, and 5.0 V xxx = Specific Device Code M