膜蒸馏系统传热传质过程优化实验分析研究.pdf

膜蒸馏系统传热传质过程优化实验分析研究.pdf

  1. 1、本文档共56页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
摘 要 膜蒸馏是一种利用疏水微孔膜以膜两侧蒸汽压力差为传质驱动力的膜分离过程, 该技术最大的优点在于其可以利用廉价的低品位能源,例如太阳能、地热等;缺点是 膜通量较低,因此寻找提高膜通量的方法是实现其工业应用急需解决的问题。 本文以气隙式膜蒸馏为研究对象,以膜蒸馏淡化苦咸水为应用研究背景,为了有 效地破坏温度与浓度边界层,增强传热传质效果,获得到较大的传质通量,膜组件采 用三向旋转切向入流的供液方式。对膜组件中具有旋转切向入流方式喷嘴的可变结构 参数 α、δ、β采用正交实验的研究方法,根据喷嘴加工精度以及实际操作条件确定了 相关因素水平值,采用设计的方案,以水及盐水为研究工质,就其切向入流结构的不 同参数组合分别进行了实验研究。以膜通量为分析因子,通过对各个参数水平对应膜 通量平均值大小比较的直观分析,结果表明,以水及盐水为工质,在相同的其它实验 工况和不同温差下,使膜通量最大的可变结构参数的最佳参数组合均为 α=70° 、 δ=2mm 、β=45° ,并且通过追加实验验证了实验结果的正确性;同时通过分析在不同 温差下的极差值,确定了对膜通量影响程度最大的参数为 β,另外恒定温度调整流量 的正交实验及以膜面热侧温度为分析因子的正交实验,均从不同的角度证实了实验结 果的正确性。 本文对采用优化后的膜蒸馏系统进行了淡化苦咸水的应用研究。对呼和浩特托克 托县地下苦咸水进行了采集和水质分析,应用设计的砂滤系统,首先对其进行了预处 理,其次采用优化的膜蒸馏系统进行淡化,实验表明,当热侧进口温度为 60℃时, 2 膜通量可达 35kg/m ·h 左右;对系统的出水水质监测表明,其矿化度为 8mg/L、氟化 物为 0.05mg/L、砷为 0.001mg/L,出水水质达到了国家生活饮用水卫生标准。 关键词:膜蒸馏;传热传质;正交实验;苦咸水 Abstract The membrane distillation is one of membrane separation technologies, which uses hydrophobic microcellular membrane and takes steam pressure difference of the both sides as a driving influence. The most significant merit of the membrane distillation is that it can use the energy which is inexpensive and low-grade, like solar energy, geothermal, and so on. And on the minus side, membrane flux is low. Therefore, the urgent issue to realize the industrial application is to find the solution to the problem of raising the membrane flux. Desalinating the bitter salty water with membrane distillation is taken as the research background for the thesis and Air Gap Membrane Distillation is chosen as the research subject. In order to cause the temperature boundary layer and the density boundary layer being destroyed effectively to get ideal effect of the mass and heat transfer and obtain high membrane flux, the membrane module uses the three directions circle tangential influx as

文档评论(0)

xjphm28 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档