惠星星LED数显电子温度计的方案设计书.docVIP

单位代码： 分 类 号： 延安大学西安创新学院 本科毕业论文（设计） 题 目 LED数显电子温度计的设计 专 业： 姓 名： 学 号： 0903024143 指导教师： 马 惠 铖 职 称： 毕业时间： 二零一三年六月 LED数显电子温度计的设计 摘要：本文设计了一种利用单片机实现对温度的智能控制及显示的方案。本毕业设计主要研究的是高精度的数字温度计的设计，继而实现对对象的温度测量。测温系统主要包括供电电源、数字温度传感器的数据采集电路、LED显示电路、按键电路、单片机主板电路，数字温度传感器的数据采集电路与单片机主板电路是整个系统的关键。采用温度传感器DS18B20对温度检测的方法及利用软件实现对的智能控制。本系统由液晶显示器LCD1602显示实时温度，具有电路结构简单、操作容易、硬件少、成本低等特点。The design of LED digital display electronic thermometer ABSTRACT In daily life, single-chip microcomputer control has brought people great convenience, the detection and control of the temperature is also extremely important. Therefore, the design of the digital thermometer has practical significance and a wide range of applications. This article describes a programmer which use a microcontroller to achieve and display the right temperature by intelligent control .This programmer mainly consists by temperature control sensors, MCU, LED display modules circuit. The main aim of this thesis is to design high-precision digital thermometer and then realize the object temperature measurement. Temperature measurement system includes power supply, data acquisition circuit of digital temperature sensor, LED display circuit, keypad circuit, board with a microcontroller circuit, data acquisition circuit of digital temperature sensor and board with a microcontroller circuit is the key to the whole system. The temperature process of high-precision digital thermometer, from collecting the temperature of the object by the digital temperature sensor and the temperature transmitted to the microcontroller, and ultimately display temperature by the LED. The digital thermometer requires the high degree is positive 125 and the low degree is negative 55, the error is less than 0.1,