MFC窗口和控件大小同时变化方案.docxVIP

MFC窗口和控件大小同时变化第一步：当然要首先设置当前对话框属性为可拖动大小变化的即 Resizing属性第二步：定义一个CList类对象，用于将所有的控件坐标存储在链表中。CList CRect,CRect listRect;第三步：初始化函数中添加在初始化窗口中最后添加:CRectrectWnd;GetWindowRect(rectWnd);//得到当前窗口（对话框）的坐标listRect.AddTail(rectWnd);//将坐标添加到链表listRect的末尾（注意是CList CRect,CRect listRect;类的成员变量）CWnd *pWndChild=GetWindow(GW_CHILD);//while (pWndChild)//依次得到对话框上控件的坐标，并将所有的控件坐标存储在链表中{pWndChild-GetWindowRect(rectWnd);listRect.AddTail(rectWnd);//由于依次将控件坐标添加到链表末尾，所以开头的坐标是对话框的坐标pWndChild=pWndChild-GetNextWindow();}第四步：添加WM_SIZE消息响应函数：void CDevicePage::OnSize(UINT nType, int cx, int cy)?{CDialog::OnSize(nType, cx, cy);if (listRect.GetCount()0)//看链表是否为空{CRectrectDlgNow;GetWindowRect(rectDlgNow);//得到当前对话框的坐标POSITION mp=listRect.GetHeadPosition();//取得存储在链表中的头元素，其实就是前边的对话框坐标CRectrectDlgSaved;rectDlgSaved=listRect.GetNext(mp);ScreenToClient(rectDlgNow);float fRateScaleX=(float)(rectDlgNow.right-rectDlgNow.left)/(rectDlgSaved.right-rectDlgSaved.left);//拖拉后的窗口大小与原来窗口大小的比例float fRateScaleY=(float)(rectDlgNow.bottom-rectDlgNow.top)/(rectDlgSaved.bottom-rectDlgSaved.top);ClientToScreen(rectDlgNow);CRectrectChildSaved;CWnd *pWndChild=GetWindow(GW_CHILD);while (pWndChild){rectChildSaved=listRect.GetNext(mp);rectChildSaved.left=rectDlgNow.left+(int)((rectChildSaved.left-rectDlgSaved.left)*fRateScaleX);rectChildSaved.top=rectDlgNow.top+(int)((rectChildSaved.top-rectDlgSaved.top)*fRateScaleY);rectChildSaved.right=rectDlgNow.right+(int)((rectChildSaved.right-rectDlgSaved.right)*fRateScaleX);rectChildSaved.bottom=rectDlgNow.bottom+(int)((rectChildSaved.bottom-rectDlgSaved.bottom)*fRateScaleY);ScreenToClient(rectChildSaved);pWndChild-MoveWindow(rectChildSaved);pWndChild = pWndChild-GetNextWindow();}}Invalidate(); //强制重绘窗口}