图纸中得符号.docVIP

图纸中的符号 Straightness - a condition where an element of a surface or an axis is a straight line.?—直度：一个条件，一个面元素或轴是一条直线 ? Flatness - is the condition of a surface having all elements in one plane.? —平整度:是条件，表面有所有的元素在一个平面 ? Roundness - describes the condition on a surface of revolution (cylinder, cone, sphere) where all points of the surface intersected by any plane.??? —圆度:描述条件对革命的表面(圆柱,圆锥,球)在所有点的表面相交的任何飞机 ? Cylindricity - describes a condition of a surface of revolution in which all points of a surface are equidistant from a common axis. —圆柱度:描述了一个条件的旋转面,使所有的点面距离相等,一个共同的旋转轴 ? Profile of a Line - is the condition permitting a uniform amount of profile variation, ether unilaterally or bilaterally, along a line element of a feature.? ?—线轮廓度:是条件允许量相同的剖面变化,醚单边或双边,沿着一条线元素的特征 Profile of a Surface - is the condition permitting a uniform amount of profile variation, ether unilaterally or bilaterally, on a surface.? —面轮廓度：是条件允许量相同的剖面变化，醚单边或双边，上表面 ? All Around Symbol - indicating that a tolerance applies to surfaces all around the part. —周围标志:表明公差适用于所有周围的部分表面 ? Angularity - is the condition of a surface, axis, or centerplane, which is at a specified angle from a datum plane or axis.? —倾斜度:是表面，轴，或中线，这是从某一特定角度基准平面或轴 ? Perpendicularity - is the condition of a surface, axis, or line, which is 90 deg. From a datum plane or a datum axis.? —垂直度:条件是表面，轴，或线，这是90度的基准平面或基准轴 ? Parallelism - is the condition of a surface, line, or axis, which is equidistant at all points from a datum plane or axis. —平行度:一个表面，线，或轴，这是等距离的所有点，基准平面或轴 Position Tolerance - defines a zone within which the axis or center plane of a feature is permitted to vary from true (theoretically exact) position.? ? —位置公差:定义一个区域内的轴或中心平面的一个特点是允许不同的真正的(理论上精确)位置 Concentricity - describes a condition in which two or more features , in any combination, have a common axis.? —同心度:描述在其中一个条件的2个或更多的功能，在任何组合，有一个共同的旋转轴 Symmetry - is a condition in which a feature (or features) is symmetrical