安全操作规程 英文.docVIP

TS International Mining Co., Ltd. Safety Operation Procedures for the mining machines  Table of Contents Chute Feeder Safety Operation Procedures 3 400 x 600 Jaw Crusher Operation Procedures 4 Belt Conveyor Operation Procedures 5 1500 x 3600 Ball Mill Safety Operation Procedures 6 FC-1500 Grading Machine Safety Operation Procedures 7 Flotation Machine Safety Operation Procedures 8 Press Filter Safety Operation Procedures 9 Slurry Pump Safety Operation Procedures 10 Chute Feeder Safety Operation Procedures Equipment check Before turning on the machine Machine Parts: Safety protection device is it working properly? Coupling bolts and roller is it working normally? Lubricating oil and grease for the deceleration part is it working properly? The wear and tear condition of the shield and funnel Pushing rod or handle is it balance, the bolts installed are they loose? Motor: Are the starting device and the index lights working properly? Is the handle of the manual motor easy to rotate? Operating Check Machine Parts Is the mine feeding process normal? Are they any debris or large pieces of ore that impact the mine feeding process? Is there any abnormal sound coming from the decelerator? Does the temperature of the decelerator keep rising? Motor Is there any abnormal sound coming from the electric parts? Does the temperature of the electric parts keep rising? Is the electric current above the control cabinet working normally? The procedure to turn on and off the machine The procedure to turn on the machine Follow the equipment check process and conduct equipment check Caution about the switch on order. Press the switch on button after ensuring that the machine is ready to work The procedure to turn off the machine Upon receiving the switch off order or emergency stop order on the machine, press the stop button right away to stop the machine from operating and then turn off the electric source inside the controlling cabinet. Note Following the production requirement