multi-component based cross correlation beat detection in electrocardiogram analysis多组分的基于互相关检测心电图分析.pdfVIP

BioMedical Engineering OnLine BioMed Central Research Open Access Multi-component based cross correlation beat detection in electrocardiogram analysis 1 2 1 Thorsten Last , Chris D Nugent* and Frank J Owens Address: 1School of Electrical and Mechanical Engineering, Faculty of Engineering, University of Ulster at Jordanstown, Northern Ireland and 2School of Computing and Mathematics, Faculty of Engineering, University of Ulster at Jordanstown, Northern Ireland Email: Thorsten Last - tote_last@yahoo.de; Chris D Nugent* - cd.nugent@ulster.ac.uk; Frank J Owens - fj.owens@ulster.ac.uk * Corresponding author Published: 23 July 2004 Received: 19 February 2004 Accepted: 23 July 2004 BioMedical Engineering OnLine 2004, 3:26 doi:10.1186/1475-925X-3-26 This article is available from: /content/3/1/26 © 2004 Last et al; licensee BioMed Central Ltd. This is an open-access article distributed under the terms of the Creative Commons Attribution License (/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Abstract Background: The first stage in computerised processing of the electrocardiogram is beat detection. This involves identifying all cardiac cycles and locating the position of the beginning and end of each of the identifiable waveform components. The accuracy at which beat detection is performed has significant im