自走式灌木平茬机设计及试验.pdf

2 0 1 0 9 41 DOI: 10. 3969/ .j issn. 1000-1298. 2010. Supp. 020 * 1, 2 2 1 1 1 1 刘志刚 王德成 郝兴玉 刘贵林 张 宁 王志军 ( 1. , 010020; 2. , 100083) , , , , , : 08% , 29% ; 08% , 25% , 7 cm, 985% , 3 t/h : : S22593 : A : 1000-1298( 2010) S0-0095-04 Design and Experim ent on Self-propelled Shrub Cutter 1, 2 2 1 1 1 1 iu Zhigang Wang Decheng H ao X ingyu iu Guilin Zhang N ing W ang Zhijun ( 1. H uhhot B ranch, Chinese A cademy of A g riculturalM echanization Sciences, H uhhot 010020, China 2. C ollege of Eng ineering, China A g ricultural University, Beij ing 100083, China Abstract A mi ing at some problem s of shrub in western region, such as difficult to harves,t heavy labor intensity and low productivity and so on, moreover, in order to provide technical support for combating desertification, a self-propelled shrub harvester w ith special articulated carbody was developed. It can work in tw ist-waist manner and sway along the sector surface. Smi ultaneously, one new shrub harvesting method of vertical and horizontal profile modeling for shrub combined m anual operation w ith adaptive profilemodeling was proposed. A lso expermi ents on caragana m icrophylla and sand w illow harvest were carried ou.t The tested resultswere listed as follow s: caraganam icrophyllam issing cutting ratewas equal or less than 08%, percent of broken stubble was 29% ; sand w illow m issing cutting rate was equal or less than 08% , percent of broken stubblewas 25% , the hei