万通炎康片前处理车间工艺设计（ 胡文婷 ，吴珊珊） 副本.docVIP

目 录 摘 要 I Abstract II 第一章 生产任务及设计依据 1 1.1 生产规模及生产任务 1 1.2 设计依据 1 1.3 设计原则 1 1.4 工艺装备设计概况 1 1.5 处方、处方来源及方解 2 1.5.1 处方 2 1.5.2 处方来源 2 1.5.3 性状 3 1.5.4 含量测定 3 1.5.5 功能与主治 4 1.5.6 用法与用量 4 1.5.7规格 4 1.5.8 贮藏 4 工艺流程框图 5 2.2 流程叙述 6 2.2.1 原药材的前处理 6 2.2.2 水提 6 2.2.3 浓缩 6 2.2.4 醇沉 6 2.2.5 制粒 6 第三章 全流程的物料衡算 7 3.1 工作任务 7 3.2 物料衡算 7 第四章 工艺设备的计算与选型 15 4.1水提罐 16 4.2三效浓缩蒸发器： 17 第五章 车间布置设计 19 5.1 车间及设备布置一般原则 19 5.1.1车间平面布置原则 19 5.1.2 厂房立面布置原则 19 51.3 设备布置原则 19 5.2 本车间和设备布置特点 20 5.2.1 车间布置 20 5.2.2 设备布置 20 第六章 主要岗位生产制度 21 6.1 生产质量管理 21 6.2 物料工艺管理 21 6.3 环境卫生管理 22 参考文献 25 附录 26 摘 要 本设计为年产17 亿片（0.35）万通炎康片的前处理车间工艺设计，本设计采用的工艺路线为：取苦玄参、肿风节 Abstract This preliminary design is for a Wantong Kang tablets whose annual product is 1.7 billion ( 0.35 ) . Take off Picriafel-terrae lour ，Glabrous Sarcandra Herb section two flavor，add boiling water twice, each 2hours, combined decoction, filtration, the filtrate was concentrated to the relative density of 1.10 to 1.15 ( 75 ℃) of clear paste, add 3 times the amount of ethanol , stir well and let stand 24 hours, the supernatant was concentrated to recover ethanol and the relative density of 1.10 to 1.20 (70 ℃) of thick cream. , the amount of added accessories , made of particles , dry, compressed into 1000 (large ) , package film-coated , derived. Design full content including process design , plant process design , material balance , heat balance ( slightly ) and process equipment selection , plant layout design , piping design of part of the section ( slightly ) , material flow chart with the process of the control pointsflowchart , floor plan, preparation of design specifications .The design in accordance with the requirements of the mission statement , through the process of the process , equipment selection, workshop layout reasonable design , according to the main equipment to determine the energy consumption and material consumption , and production management , waste management and other design . . Keyword：Wantong Kang tablets ；pr