超程开距（Over range opening）.docVIP

超程开距（Over range opening） Over range: also known as over stroke, after the contact of moving and static contact, the mechanism will continue to travel over the course, which is beyond the location of the static and dynamic contact. Opening distance: the distance between the movable contact of the breaker and the static contact. In illustration, take ZN28A as example. Data 1 measures the open distance, and data 2 measures the overshoot. The two parameters are the values at the gate division and the values at the closing time. Remember to use 100mm vernier calipers with depth measurement (with depth for measuring opening distance) for measurements. How to adjust the opening distance of vacuum circuit breaker? There are three ways to choose the following: (1) rotating and vacuum breaker, arc chamber, dynamic transmission pole connecting rod, opening distance is tight, a few buttons, open distance is big, then loose a few buttons. (2) rotating arc extinguish chamber. This method belongs to micro regulation, and is especially suitable for the adjustment of synchronism. (3) adjust the thickness of the gate limit. This method generally by the manufacturer in the factory has been adjusted, maintenance, repair should not be adopted. Main characteristics, parameters and functions of vacuum circuit breaker In order to determine whether a vacuum breaker meets the requirements, some other parameters such as its closing time, closing speed, arcing time, trip distance and contact burn loss thickness shall be determined and determined. Through optimization and selection, the mechanical and electrical characteristics of the vacuum circuit breaker are evaluated comprehensively. 2.1 closing bounce For vacuum breaker, it is the ideal condition to not bounce when the static and dynamic contact is closed. However, in many cases, the bouncing time of the contact is reduced to ensure that the contact is of high quality, but the replaceable vacuum contact still hopes to eliminate the vibrati