网络命令大全（Network command Daquan）.docVIP

网络命令大全（Network command Daquan） DOS network command complete Two, ipconfig/winipcfg Different from Ping, ipconfig and winipcfg tools can be used to view and modify the configuration of the tcp/ip protocol in the network, such as IP address, gateway, subnet mask, etc.. Also To view the hosts related information, such as host name, DNS server, node type, etc.. The physical address of the network adapter is very useful when detecting network errors. These two tools are in Windows 95/98 can be used, the function is basically the same, but the ipconfig is displayed in the form of DOS characters, and winipcfg is displayed graphically, that is, the two tool is a tool Just one version under DOS and the other under windwos, but note that in Windows NT, you can only run the ipconfig tool in DOS mode. At command prompt Type winipcfg /? Or ipconfig can get help for winipcfg or ipconfig usage.) Main function: displays the configuration information of the IP protocol inside the users host 1, the syntax of the ipconfig command Ipconfig[/all][/batch, file][/renew, all][/release, all][/renew, n][/release, n] All - displays all the details related to the tcp/ip protocol, including the host name of the test, the IP address, the subnet mask, the node type, and whether the IP routing is enabled or the network card is enabled Logical address, default gateway, etc.. Batch file - store the results of the test in the specified file file name so that you can view each item one by one. If you omit the file file name, the system will save the result of the test In the winipcfg.out file of the system. Renew all - updates the communication configuration of all adapters, and all tests are restarted. Release all - the communication configuration that releases all adapters. Renew n - update the communication configuration of adapter No. n, and all tests are restarted. Release N - release of communication configuration for adapter No. n. 2, winipcfg command The functions of the winipcfg tool are basi