气囊顶升移运沉箱工艺的改进和完善-中国港湾建设.PDFVIP

36 卷 6 期 国港湾建设 Vol. 36 No.6 2016 年6 月 China Harbour Engineering Jun. 2016 气囊顶升移运沉箱工艺的改进和完善 东景洁，王月婧 （中交一航局 三工程有限公司，辽宁 大连 116083 ） ： ， ， 要 重力式码头施工常会依地而建临时沉箱预制场 在出运沉箱工艺选择时 由于气囊出运沉箱工艺具有成本 低、施工高效的优点而备受青睐。文章针对气囊廊道结构选择、气囊顶升安全、连锁沉箱工艺，通过工程实践和深 ， 、保证工艺安全角度， 。 入摸查 从加快施工进度、减少投资 提出收效良好的气囊出运沉箱工艺改进措施 ： ； ； 关键词 气囊顶升 移运 沉箱 ： ： ： 中图分类号 U655.4 文献标志码 B 文章编号 2095-7874（2016）06-0052-04 doi ：10.7640/zggwj s201606013 Improvement of technology for airbag j acking and transfer of caissons DONG Jing-jie，WANG Yue-jing （No.3 Eng. Co., Ltd. of CCCC First Harbor Engineering Co., Ltd., Dalian, Liaoning 116083, China ） Abstract With the development of gravity quays, it has become a mainstream to build caisson prefabrication yards according to the local conditions. On selection of technological process for handling and transportation of caissons on prefabrication yards, the technology of airbag j acking and transfer of caissons is favored by construction units because of low cost and high efficiency. Based on airbag -corridor structure selection, the safety of airbag j acking and chain caisson process, Effective processing measures were proposed to improve rubber pneumatic bag j acking and transfer of caissons from the aspects of quickening construction progress, reducing investment, and guaranteeing technology safety through engineering practice and investigation. Key words airbag j acking; transfer and transportation; caisson 0 引言 囊、气囊充气系统、卷