电梯井道部件重型瓦楞纸箱包装设计-包装工程.PDFVIP

包 装 工 程 第 37 卷 第 17 期 ·54 · PACKAGING ENGINEERING 2016 年 9 月 电梯井道部件重型瓦楞纸箱包装设计 苏婷 1 ，孙昊 1,2 ，王利强 1,2 ，钱怡 1 ，张新昌 1,2 （1.江南大学，无锡 214122 ；2.江苏省食品先进制造装备技术重点实验室，无锡 214122 ） 摘要： 目的 设计装载方便、成本合理的电梯井道部件重型瓦楞纸箱包装方案，以代替现有的木箱 包装。方法 在分析电梯零部件包装现状的基础上，采用重型瓦楞纸箱作为井道部件的外包装，内 包装采用普通瓦楞纸箱，并使用隔挡对零部件进行限位和缓冲，托盘仍采用木制托盘。结果 实现 了电梯井道部件的合理装载，提高了集装箱及货车的装载率，有效降低了企业的包装成本。结论 采 用重型瓦楞纸箱包装可以替代原有的木箱包装，在保证包装保护性能的基础上，该包装方案装载率 提高了 66 ％。 关键词：重型瓦楞纸箱包装；电梯井道部件；装载率 中图分类号：TB484.1 文献标识码：A 文章编号：1001-3563(2016)17-0054-05 Heavy Corrugated Carton Packaging Design of Elevator Shaft Components 1 1,2 1,2 1 1,2 SU Ting , SUN Hao , WANG Li-qiang , QIAN Yi , ZHANG Xin-chang (1.Jiangnan University, Wuxi 214122, China; 2.Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment Technology , Wuxi 214122, China) ABSTRACT: It aims to design a set of heavy corrugated carton packaging solution for elevator shaft components, and take place of the wooden case packaging. On the basis of analyzing the current situation of the elevator components packaging, heavy corrugated carton was adopted as external packaging for shaft parts, and ordinary corrugated carton as internal packaging. Interlayers were used for displacement limiting and buffering. A wooden tray was used. This solution realized reasonable loading of elevator shaft components, improved the loading rate of containers and trucks, and effec- tively reduced packing cost. In conclusion, the heavy