M公司批次连续混合型生产作业计划中线性规划模型构建和优化的应用研究.pdfVIP

Management Science and Engineering 管理科学与工程, 2016, 5(4), 237-247 Published Online December 2016 in Hans. /journal/mse /10.12677/mse.2016.54026 A Study of Linear Programming Modeling and Optimization on Operational Production Scheduling for Batch/Continuous Mixed Production in M Company Yue Zhang Beijing Lechun Commercial Trading Co., Ltd., Beijing th th th Received: Dec. 8 , 2016; accepted: Dec. 27 , 2016; published: Dec. 30 , 2016 Copyright © 2016 by author and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract This article has set up a linear programming model to determine M company’s operational pro- duction planning, with an optimal output compared with the current manual scheduling operation. This model has chosen a typical line in the M production, which is a mix of batch and sequential production; it has used the evened weekly production plan as an input, the detailed operational production time/batch of all packaging machine and coating line as an output, and has performed a careful selection on modeling assumptions, target function and constraints. The model has used solver as a key solving tool, and has run an optimized result which would generate a minimum cost for production. On top of this, a correction and discussion on the results are performed based on production needs to better fit into the overall execution. This paper has also proposed a general rule to apply in similar productions, offered suggestions for future optimization, and there- fore has great value in future applications in similar enterprises. Ke