现场考试（examination on the spot）.docVIP

现场考试（examination on the spot） Field examination outline First, the process and principle (15 points): 1. brief introduction of expander system process. Brief introduction of system flow of 2. oil station Brief introduction of 3. meter station system process Two, normal operation (15 points): 1. adjustment of cooling capacity of expansion mechanism. 2. On-Site Extraction of three automatic valves, two manual valves to check the valve, valve position, stroke position confirmation. 3. tank pressurization, pressure relief operation Three, drive operation (15) 1. prepare the preparation before the expander starts How does the 2. oil station start?. 3. start of instrument compression station. 4. pre cooling operation of liquid oxygen pump before starting. Four. Parking operation (25) 1. stop operation of expander. 2. stop operation of instrument compressor 3. the heating operation of the expander. 4. heating and defrosting operation of liquid oxygen pump. Five, accident treatment: (30) 1. emergency handling of safety valve for liquid oxygen storage tank 2. emergency operation of power failure unit 3. system without water, emergency operation of the system A brief introduction to the flow chart of expander system. The booster compressor and by pumping pressurized air after cooling, (flow 54000Nm3/h, pressure 2.71MPa.G) into the supercharger driven by the expansion machine, consumed by expander output energy, so that the air pressure can be further improved, pressurized air into the compressor after cooler, to a required temperature after cooling into high pressure heat exchanger by reflux liquid oxygen, nitrogen and cooled to a certain temperature after entering the turbine expansion, expansion into the air under the column. An emergency shut-off valve is arranged in the expander inlet, when the unit is in danger, according to the danger point signal interlocking, the valve can be closed in a very short period of time, to cut off the gas source, the quick stop, play a secu