玻璃分类（Glass classification）.docVIP

玻璃分类（Glass classification） Glass classification Glass is made of quartz sand, soda ash, feldspar and limestone as the main raw material, by melting, molding, cooling and solidification of non crystalline inorganic materials. It has the transparency of general materials, and has excellent mechanical and thermal properties. Moreover, with the development of modern architecture, it is developing toward multi-functional direction. The deep processing products of glass can control light, regulate temperature, prevent noise and improve architectural art and decoration. Glass is no longer just lighting material, but also a kind of structural material and decorative material of modern architecture. Flat glass Flat glass refers to flat glass products without other processing, also known as white glass or net glass. According to the production method, it can be divided into ordinary flat glass and float glass. Flat glass is a glass building in the largest production capacity, the use of a most, mainly used for doors and windows, lighting up (visible light transmittance of 85%90%), enclosure, thermal insulation and sound insulation effect is further processed into other glass original film technology. Flat glass can be divided into window and decorative glass according to its use. According to the national standard ordinary flat glass (GB4871 - 1995) and float glass (GB11614 - 89) provisions, glass according to its thickness can be divided into the following specifications: Ordinary flat glass produced by drawing method: 2mm, 3mm, 4mm, 5mm four categories. Float glass: 3mm, 4mm, 5mm, 6mm, 8mm10mm, 12mm seven categories. The length and width ratio of glass produced by drawing method shall not be greater than 2.5, of which 2 and 3mm thick glass shall not be smaller than 400mm * 300mm, 4, 5 and 6mm thick glass shall not be less than 600mm * 400mm. Float glass size is generally not less than 1000mm * 1200mm, 5 and 6mm, maximum up to 3000mm * 4000mm. According to the national stand