控制器故障（Controller failure）.docVIP

控制器故障（Controller failure） Other answers (1) Malfunction and maintenance of charger and controller for electric vehicle Charger and controller overview Charger is one of the four core components of electric bicycle. The charger has a bad influence on the service life of the battery. The charger is mainly composed of rectifier, filter, high voltage switch, voltage exchange, constant voltage and electric control. The use of the rectifier filter circuit is 220V AC voltage into voltage tributaries around 300V, through the high voltage switch circuit and voltage switch, a low-voltage DC voltage required when charging, the charging control circuit control of battery charging, the charger in this way has the advantages of small size, light weight, high efficiency etc.. Electric vehicle controller implementation and components: the current electric bicycle controller, regardless of brush, brush, PWM speed regulation is widely used. The controller must have PWM generator circuit and power supply circuit, power device, power device driving electric control device, drive circuit, control unit (steering wheel, motor Hall etc.) signal acquisition unit and processing circuit, overcurrent and undervoltage protection circuit. Use and maintenance of charger The correct use of the charger not only affects the reliability and service life of the charger itself, but also affects the life of the battery. When charging the battery with charger, please plug in the chargers output plug and plug in the plug. When charging, the chargers power indicator light is red, and the charging indicator light is also red. After charging, the charging indicator is green. When you stop charging, please dial the input plug of the charger first, then plug the plug of the charger. Normally, excessive discharge and overcharging of batteries are harmful. Therefore, we must charge frequently, do not charge too much. The service life of the battery is greatly related to its discharge depth. In particular, afraid