气硬性胶凝材料（air-hardening binding material）.docVIP

气硬性胶凝材料（air-hardening binding material） A collection of civil engineering materials The second chapter is about the basic properties of materials Noun interpretation Cementitious material air-hardening binding material Hydraulic cementitious material Gypsum Anhydrite Plaster of Paris Setting hardening Alpha hemihydrate gypsum Beta hemihydrate Two water gypsum Hemihydrate gypsum High strength gypsum Quick lime Slaked lime siliceous lime Magnesian lime Under-burnt lime Burnt lime Lime digestion Lime Chen Fu Ground lime Lime milk Lime soil Concrete Xylolite water glass Water glass modulus To determine the problem (of the tick, wrong row *) The rigid cementitious material can only be hardened in air, while the hydraulic cementitious material can only be hardened in water. When lime is aged, the lime slurry flows into the ash storage tank and needs to be aged for more than two weeks. The main purpose is to prepare lime paste with good workability, so as to ensure the quality of construction. Slaked lime is damp in the air and removed as slaked lime, and does not affect the use. The carbonation reaction equation of lime paste in air is: Ca (OH) 2+CO2=CaCO3+H2O The most prominent technical property of construction gypsum is condensation, hardening, and a slight expansion in hardening. Construction gypsum board because of its high strength, so in decoration can be used in humid environment. Water glass is good in water resistance after hardening, so it can be painted on the surface of gypsum products, so as to improve the durability of gypsum products. The greater the modulus n value of water glass, the greater its solubility in water. The molecular form of construction gypsum is CaSO4 2H2O. Because the plaster of the ordinary building has a thicker crystal, it needs much less water than a high strength building plaster when it comes into a plastic paste. Lime is used to reduce the amount of heat produced during lime ripening. The drying shrinkage of lime is large, which is