五坐标水切割中的刀具补偿方法.pdfVIP

# # : 100 1- 2265( 2009) 04- 0070- 03 五坐标水切割中的刀具补偿方法 齐忠霞 (西北工业大学机电学院, 西安 710072) : 针对五轴水切割自动编程和加工问题, 提出五轴水切割的刀具补偿方法采用五坐 刀具长度补 偿法控制五轴水切割靶距; 刀具长度补偿值适应喷嘴长度调整通过分析三维刀具半径补偿与刀位轨 迹计算的一致性, 利用刀具半径补偿法初步规划五坐 水切割刀位轨迹曲线应用结果表明, 刀具补偿 法对解决五轴水切割加工靶距控制是切实可行的, 且解决了水切割编程工具的问题 : 刀具补偿; 自动编程; 水切割; 靶距 : TG547; TG664 : A Approach of Cutter Offset on 5-axis AbrasiveW aterjetM achining Q I Zhong-x ia (M e hatron i s College, North W est Polyte hni alUn iversity, X i. an 710072, Ch ina) Abstract: To solve the problem s that the ma h in ing of 5-ax is abrasive w aterjets, put forw ard the methods of ontrolling stand-off distan e and hanging tube length by ompensating tool length. In order to solve the prob- lem of auto programm ing on 5-ax isw aterjetsma h in ing, it is using spa e tool radius ompensation algorithm for omputing utter lo ation due to the both are identi al. The result show that the use of tool ompensation on 5- ax is abrasivew aterjets ma h in ing is feasible on ontrolling stand-off distan e and an solve the prob lem of auto programm ing. K ey words: utter offset; auto programm ing; w aterjet; stand-off d istan e CAM 0 , , , , , , , 1 , ( CAM) , , , 1 , , C , C , C M T O , [ 1-3] , R (), () L , , , ,