反激变换器的交叉负载能力提升.pdfVIP

ADVANCED ENGINEERING ASTEC POWER HONG KONG Improving Cross Load Regulation for Flyback Converter HK Advanced Engineering Prepared by : Agnes Cheung Checked by : Victor Sze Approved by : Allen Tang : Name Signature PRE-00 29 Apr 99 REV DATE Remark REF. No. : D99-003 Technical Report Page 1 05/19/99 ADVANCED ENGINEERING ASTEC POWER HONG KONG Background: The power capacity of the share regulated multi-output flyback converter is limited by the cross regulation performance. Using of post-regulator can solve the problem but is penalized by high cost, high part count and high loss. A simple and low cost solution , which can easily improve the cross regulation by 50%, will be presented. The circuitry: This approach requires a couple choke adding to each of the output rails as shown in figure 1. For simplicity of demonstration for the improvement, a simple dual auxiliary converter with 5V and 3V3 outputs are examined. Fig.1 Operation Theory: The cross regulation of the flyback is determined by two factors: 1) The output rectifiers forward voltage, and 2) The coupling effect of the secondary transformer windings. Technical Report Page 2 05/19/99 ADVANCED ENGINEERING ASTEC POWER HONG KONG The rectifier effect can be minimized by careful choose of the devices. Use of the DC stack instead of AC will also help. The coupling effect is