中钢废水处理及再生技术开发.PDFVIP

中鋼廢水處理及再生技術開發 Development of Wastewater Treatment and Reclamation Technologies in CSC 1 2 2 M.S. Yeh, C.I. Cheng, Y.M. Chen CSC is the largest steel making comp any in 103 Taiwan which con sumed 130 thou sand m3 water/ 3 3 3 13 m /day 4 m / day and discharged 40 thousand m wastewater/day day in 20 15. CSC developed wastewater treatment and reclamation technologies to decrease water usage and pollution . This study successfully developed a high efficiency MBR technology to treat coking and cold MBR rolling wastewater. The MBR system reduced S.S. S.S. concentration in coking wastewater from 100 mg/ 100 5 mg/L COD L to 5 mg/L, enhanced COD removal rate from 88% 88% 93% to 93% (reduced COD discharge of 720 kg COD/ COD day), and stabilized the efficiency of following O3 720 kg COD/day treatment system . The MBR system decreased COD COD 152 concentration of cold rolling wastewater from 152 80 mg/L COD 449 kg mg/L to 80 mg/L (reduced COD discharge of 449 COD/day kg COD/day). This study established an economical EDR desalination technology to reclaim hot rolling EDR cooling and EGL rinse wastewater. The EDR system (1) in hot rolling process reclaimed 550 m3/day cooling wastewater with a conductivity removal rate of 80%, and a recovery rate of 75%. Pumping the high quality 80% reclaimed water into hot rolling cooling water system 75% 550 m3/day could raise s