脱硫概述（Desulfurization overview）.docVIP

脱硫概述（Desulfurization overview） 1 Overview 1.1 project name Flue gas desulfurization project of Shanxi Gujiao power plant phase two (2 * 600MW) expansion project. 1.2 process technology roadmap adopted The engineering technology of flue gas desulfurization using limestone - gypsum wet flue gas desulfurization, desulfurization agent for limestone limestone slurry (CaCO3), because of its high chemical activity and low price factors become the world widely used in wet desulfurization desulfurization agent of raw material preparation. The two generation of calcium sulfate and calcium sulfite in the absorption of SO2 in flue gas and limestone slurry reaction tower after calcium sulfite in situ forced oxidation for gypsum, gypsum slurry by two after dehydration treatment can be used as the by-products of the sale. 1.3 main design principles of process system (1) the desulfurization process adopts limestone gypsum wet flue gas desulphurization, and sets GGH. (2) the boiler is equipped with one furnace and one tower corresponding to the desulfurization unit, and the flue gas treatment capacity of each desulfurization unit is designed according to the BMCR working condition. Each desulfurization device is equipped with a movable blade adjustable booster fan. (3) the desulfurization system is equipped with 100% flue gas bypass, so as to ensure that the desulfurization device does not affect the safe operation of the generator set under any circumstances. (4) the device can match the start, stop, operation and load change of the boiler. (5) the flue gas desulfurization unit and auxiliary facilities can adapt to the boiler under the condition of the minimum stable burning load (30%BMCR) condition and the 100%BMCR working condition, and run under any load condition. (4) the preparation process of absorbent adopts the scheme of self qualified slurry of purchased qualified limestone powder. (5) gypsum disposal system adopts the two stage dewatering scheme of gypsum cyclone and vacu