花肥的使用（The use of fertilizers）.docVIP

花肥的使用（The use of fertilizers） About ferrous sulfate! Source: Y (a) ferrous sulfate, and kind, should be sealed, to prevent damp, if damp, will slowly become oxidation of trivalent iron is not easy to be absorbed by plants, its effectiveness will be greatly reduced. (two) it should be put into practice now, and it is common to have some flower friends for the convenience of drawing. It is very unscientific to prepare a large amount of alum water for a long time. As a kind of long-term in the water will be slowly oxidized into trivalent iron is not easily absorbed. (three) the amount of application should not be too large, and the number of times should not be too frequent. According to years of experience, the pot soil with ferrous sulfate to 5 grams to 7 grams per pot is appropriate, watering or spraying 0.2% to 0.5% is appropriate. If the dosage is too large, the number of times of topdressing will lead to plant poisoning, and the root will become gray, black and decomposed. Meanwhile, the absorption of other nutrient elements will be affected by its antagonism. (four) should be used for preparation of ferrous sulfate, causing the ferric oxide precipitates in calcareous alkaline water, become difficult to be utilized by plants of the state. The best choice is rain, snow or cold water. If you cannot but use alkaline water should be prepared in every 10 liters of water to 1 grams to 2 grams of potassium dihydrogen phosphate, make it a improved water subacidity. Add 3% vinegar in alkaline water, also have better effect. (five) applying ferrous sulfate in alkaline soil, the application of appropriate amount of potassium fertilizer (but not suitable for plant ash), because potassium is conducive to the movement of iron in plants, can improve the effectiveness of ferrous sulfate. (six) the application of ferrous sulfate solution to hydroponics flowers and trees should avoid solarization. Sunlight exposure of iron containing nutrients can precipitate iron in solution and