谈论地下室后浇带设置与施工技术探讨（Discussion on setting and construction technology of back pouring belt in basement）.doc

谈论地下室后浇带设置与施工技术探讨（Discussion on setting and construction technology of back pouring belt in basement） Discussion on setting and construction technology of back pouring belt in basement 1, the basement of the high-rise building engineering pouring belt is a key part in the project, the construction process of building can be seen in the basement of building elevation after the construction of the pouring belt must be according to the design, specification and engineering practice, a reasonable set of post pouring belt position. Therefore, it is necessary to plan the construction of the basement after pouring, so as to reduce the difficulty of the construction of the post pouring belt, solve the problems and problems that have puzzled the construction staff for a long time, and guarantee the quality control of the construction of the post pouring belt. 2. General situation of Engineering Huangling Mining Group, single apartment building and canteen project, a total construction area of 27715.3m2, 25132.7m2 on the ground, underground 2582.6m2, building area 2582.6m2. Among them, the single apartment on the ground floor 18, the ground floor, high 66.9m, beam raft foundation, foundation buried -6.5m; staff canteen 2 floors underground, 1 floors underground, height 9.3m, independent foundation, the base is deep -6.5m. The basement of the engineering floor with a thickness of 60cm and C35, P6 impermeable concrete, 30cm, C40, P6 wall impermeability of concrete, the basement roof is 45cm thick C35 and P6 impermeability of concrete, flat shape . The basement of the bottom plate, side walls and roof are set and two after pouring, pouring belt width is 1000mm and the position of the 1 axis and 5-6 axis of the cruciform set, after pouring the total length of a total of about 700m, with the thickness of girder thick. The reinforcing bars of the bottom plate and the top pull are double sides and a steel mesh plate is arranged in the middle. The reinforcement of the post pouring zo