重油设计之催化（Catalysis of heavy oil design）.docVIP

重油设计之催化（Catalysis of heavy oil design） Mechanical equipment Mechanism and protective measures of regenerator cracking in heavy oil catalytic cracking unit Fu Yansheng refinery of Maoming Petrochemical Company (Guangdong city of Maoming province ##$!!) Abstract: the cracking of regenerator and three rotation of a heavy oil catalytic cracking unit in a refinery of Maoming Petrochemical Company is introduced Stress corrosion cracking. It is pointed out that the external wall insulation can be used to increase the wall temperature, reduce the regeneration excess oxygen content, and use sulfur transfer additives and reduce the amount of combustion improver Low smoke dew point temperature and other measures to reduce or even avoid the stress corrosion cracking of regenerator and three screw. Key words: heavy oil catalytic cracking, stress corrosion, sulfur three, sulfur oxide concentration The refinery of Maoming petrochemical company! RFCC units put into operation in $%% years, processing capacity # (*). The main equipment, regenerator and three rotary are designed by Sinopec group Beijing Design Institute, which are manufactured by Maoming petrochemical structure factory and Maoming petrochemical machinery plant respectively. The basic parameters of the device are shown in table $. Table $device basic parameters Container No. three regenerator Design pressure (*, + # # $%. The operating pressure (*, + # / # $%. The actual operating temperature of 0. #.$# *! Lining material, bauxite cement, bauxite cement The lining thickness * 11 $# $# Design materials 2-3 2-3 Practical material #4 #4 For $%% $%% 5 $$$$5 date The wall thickness of the inner diameter of *11 6 height 66 * *- * #*$/.##*.###* .##6! -%# $#%#6 .$##6 $%%! Year overhaul, inspection found that the fillet weld head and riser regenerator gas collecting chamber connected with $- crack, outside the gas collecting chamber has 7 cracks. The base material. The cracks, weld the remaining distribution in the upper and l