风机全压概念（Fan concept of full pressure）.docVIP

风机全压概念（Fan concept of full pressure） Relationship between total pressure, dynamic pressure and static pressure of centrifugal fan under full pressure and centrifugal fan In order to ensure the normal ventilation, the static pressure that can overcome the resistance of the pipe network and the dynamic pressure to transport the air fluid are needed Static pressure and dynamic pressure must be used in pipe network operation. The sum of static pressure and dynamic pressure is called full pressure. Total pressure refers to the total pressure increase given by the blower, that is, the difference between the total pressure at the outlet and the inlet of the fan. Total pressure (1) When the fan is in use, only the intake pipe and no air outlet pipe, the fan outlet relative static pressure is Zero, when the fans total pressure is: Namely: (fan outlet dynamic pressure + outlet relative static pressure 0) - (import static pressure [fan inlet measurement point static pressure + this measuring point to Hydrostatic pressure at the inlet flange + dynamic pressure at the inlet flange (when the test tube is equal to the load area of the inlet flange), The dynamic pressure at this inlet flange equals the absolute value of the static pressure measured at the inlet manifold. The static pressure of the static pressure pipe is in the bag The dynamic pressure of the inlet of the fan is included, because the static pressure of the measuring point at the inlet of the blower is negative, and the moving pressure is positive, so here The absolute value of full pressure is less than the absolute value of static pressure. (2) When the fan inlet is not connected to the pipe and the outlet meets the pipe, the inlet of the fan can be regarded as relative full pressure, static pressure and moving The pressure is zero. At this point, the fans total pressure is: The total pressure is equal to the sum of the dynamic pressure and the static pressure at the fan outlet (at this time the absolute total pre