摄影基础学习（Photography Based Learning）.docVIP

摄影基础学习（Photography Based Learning） Shutter speed (exposure time) The shutter speed, can control the time of photosensitive element receiving light, shutter speed is generally used to represent the second, for example: 1/30 refers to the shutter speed of 1/30 seconds, likewise, 1/60 refers to the shutter speed of 1/60 sec shutter 1/60 seconds is two times the 1/30 shutter speed. The shutter speed in the end is what the concept, look at these parameters may also Oracle Oracle than for beginners, I hope to make a simple example that we can understand, first I set 5 shutter speed: 1/8 seconds, 1/16 seconds, 1/30 seconds, 1/60 seconds, 1/120 seconds, if I were the normal subjects the exposure need shutter speed to 1/30 seconds, then we will use 1/30 second shutter speed to shoot, if you use 1/8 seconds to shoot, the photosensitive element recording time is too long, so the photo will be overexposed, photos are overexposed concepts too bright, sometimes there will be a white except for no other color photos, if you use more than 1/30 seconds shutter speed for 1/60 seconds, 1/120 seconds or faster shutter speed, the photosensitive element short recording time, unable to obtain suitable illumination Film information, the photos will be too dark, or even a black in addition to no other color photos, this is also called exposure. Shutter speed has a safe value, usually faster than the shutter speed of 1/200 seconds, so that ordinary people can take pictures with clear pictures unless you have Parkinsons disease. (dont know Parkinsons disease? Go to Baidu! If there are problems, ghosting, ghosting, blur, photo shoot, you may be caught on camera hand shaking, and the shutter speed is too slow and caused (ie, hand shake faster than the shutter speed), if you shoot is not movable objects, then use a tripod, if it is a mobile object, then increase the shutter speed. Some people want to ask, increase the shutter speed, do not shoot the exposure? In fact, this problem can be solved