气力输送设备（Pneumatic conveying equipment）.docVIP

气力输送设备（Pneumatic conveying equipment） Pneumatic conveying equipment Pneumatic conveying equipment is the use of pressure pneumatic conveying, the basic principle is through the pressure transmitter (tank) the compressed air energy (pressure and kinetic energy can be transferred to the conveyed material), overcome resistance material sent to the other end. Pneumatic conveying equipment can be divided into two categories: suction and delivery according to different working pressure. Suction type according to the system of vacuum, can be divided into low vacuum (vacuum less than 9.8kPa) and high vacuum (vacuum degree is 40 ~ 60kPa) two kinds. Pressing type according to system function pressure can be divided into high-pressure pressure for (1~7) * 105Pa and low pressure (pressure below 0.5 * 105Pa) two kinds. In addition, there is a mixing system which has both suction and delivery in the system, closed loop system (air closed circuit, material can be recycled) and pulsed pneumatic conveying system. Eltech pneumatic conveying equipment has good dustproof effect; easy to realize mechanization and automation, reduce labor intensity, saving manpower; in the transport process, can be a variety of technology operations at the same time, such as mixing, crushing, sorting, drying and cooling; to prevent the material moisture, pollution or mixed with debris and other advantages, so it has been applied in the Department of metallurgy, casting, chemical, building materials, food processing etc.. Its main disadvantage is the power consumption greatly; equipment (mainly separator population) and pipeline (mainly elbow) wear faster, if the design, construction or improper operation, is easy to cause material deposition, so that the conveying jam, interrupt; transportation should not be high humidity, viscous or easily broken material etc.. Main equipment and components of pneumatic conveying equipment Pneumatic conveying equipment in general by the receiver (such as pipes, nozzles,