硬盘的命名规则（Naming rules for hard disks）.docVIP

硬盘的命名规则（Naming rules for hard disks） Seagate hard disk type identification method Seagate hard disk number is relatively simple, and its identification method is: ST+ hard disk size + capacity + Master ID + vice identifier + interface type. To make it easy for everyone to understand, simple expressions are: ST, X, XXXX, XX, XXX, that is to say, its hard disk number can be divided into four parts. First of all, ST stands for Seagate, that is, the products of Seagate. Then, the first part of X stands for the shape and size of its hard drive. 1 is 3.5 inches, the thickness is 41mm the full height of the hard disk; 3 is 3.5 inches, the thickness of 25mm half height of the hard disk; 4 is 5.25 inches, the thickness of 82mm hard disk; 5 means the size is 3.5 inches, the thickness of 19mm hard disk; 9 for size 2.5 inch hard disk. The second part of the four X refers to the capacity of the hard disk, usually consisting of 3 to 4 bit numbers, and the unit is GB. For example, 1600 means that the capacity of the hard disk is 160GB, and 400 or 800 means that its capacity is 40GB or 80GB. The third part of the two X for the hard disk signs, by the main signs and Deputy signs of the composition. The first number is the main symbol, and in the Seagate IDE hard disk, the disk number is the hard disk. For example, the number 2 indicates that the disk has 2 disks. In the SCSI Seagate hard disk, the main logo refers to the speed of the hard disk. With the master mark, of course, there will be a secondary identifier, and the latter number is the sub symbol. It is only when the main logo is the same or invalid, the secondary identification is meaningful. It generally represents the performance and algebra of the hard disk. When the number is bigger, the higher the algebra, the better the performance, and the more hard the disk is. The third part of the three X is mainly composed of 1 to 3 letters, which indicates the type of hard disk interface. The general desktop IDE hard disk is rela