精装书封面尺寸（Hardcover book cover size）.docVIP

精装书封面尺寸（Hardcover book cover size） From left to right: 3CM +1.2 hemorrhage (Jin Kou) + book cover thickness + width + back book cover width +1.2 (Jin Kou) +3CM bleeding From top to bottom are: 3CM bleeding + Book height, +3CM bleeding Hardcover is a more elaborate form of binding in book publishing. Compared with paperback books, hardcover books have the advantages of exquisite materials, solid binding, beautiful decoration and long-term preservation. Classic books, printed books, and frequently used tools are usually in hardback. With the development of publishing, more and more hardcover books are published. As a staff editor, cover design and printed materials for personnel, and the size of hardcover book cover and jacket, should have certain understanding, in order to avoid the design work, because the size is not suitable, influencing the appearance, economic losses and waste of material caused serious. Hardcover books in several common forms: According to the spine of the form of points, there are two kinds of circular and square spine spine. The square of spine, the thickness of the book is thicker than. Because the book folded and cable line, the spine height higher than that of the book, the more obvious sheet. Therefore, the square of the spine of the hardcover book shoulds not be too thick, generally applicable to 20mm within the spine. Round of spine, because before and after the books position is slightly different, the fold of the book slightly semiorbicular, distributed in a cambered surface, the thickness of balance. Over the mouth of the spine and the convex round book to concave round. So thick books with round back better. The round ridge book is processed by rounding and the back ridge is arc shaped. Generally, the thickness of the book core is the chord and the arc is 130 degrees. Round ridge can be divided into three no ridge (only rounding up the ridge ridge) and three (rounding up the ridge, height and thickness of the board type ridge of the