细粉半焦预热燃烧过程中颗粒特性与氮元素释放 - 中国电机工程学报.PDFVIP

第 37 卷 第 15 期 中 国 电 机 工 程 学 报 Vol.37 No.15 Aug.5, 2017 2017 年 8 月 5 日 Proceedings of the CSEE ©2017 Chin.Soc.for Elec.Eng. 4415 DOI ：10.13334/j.0258-8013.pcsee.162127 文章编号：0258-8013 (2017) 15-4415-07 中图分类号：TK 16 细粉半焦预热燃烧过程中颗粒特性 与氮元素释放关系实验研究 1 2 2 2 杨二浩 ，朱建国 ，欧阳子区 ，吕清刚 (1．中国科学院大学，北京市 海淀区 100049；2．中国科学院工程热物理研究所，北京市 海淀区 100190) Experimental Study on the Relationship Between Particle Properties and the Release of Nitrogen in Fine Char During Preheating and Combustion Process 1 2 2 2 YANG Erhao , ZHU Jianguo , OUYANG Ziqu , LÜ Qinggang (1. University of Chinese Academy of Sciences, Haidian District, Beijing 100049, China; 2. Institute of Engineering Thermophysics, Chinese Academy of Sciences, Haidian District, Beijing 100190, China) ABSTRACT: The relationship between the release of nitrogen 摘要：对细粉半焦预热燃烧过程中氮元素的释放与颗粒特性 and the particle properties in fine char during preheating and 的变化关系进行了实验研究，实验中预热温度为900℃，燃 combustion was studied experimentally. The preheated 烧温度为 1050℃。结果表明预热过程中，半焦颗粒比表面 temperature is 900 o C , the combustion temperature of 1050 o C . 积和孔径与氮元素的释放有密切关系。一次风当量比λCFB The results show that in the preheating process the release of 较大时，半焦颗粒的比表面积与孔径也较大，促进了氮元素 nitrogen is closely related to the specific surface area and pore 的释放。燃烧过程中，在二次风与三次风之间区域，颗粒比 size of char particle. When the equivalence ratio of primary air 表面积和含氮官能团峰值均迅速降低，表明颗粒在这段区域 is larger, the specific surface area and pore size of char 燃烧剧烈，同时氮元素大量释放，因此合理控制二次风与三 parti